Maytag Machine Restore Support, Neptune Washing machine Troubleshooting and How To Access

This washer and dryer established has been all around for some time now, the 3000 series could be almost 12 several years previous.

Accessing the washer’s primary parts is mostly carried out from the entrance, to eliminate the back again is basic, I will describe “How To” at the end of this write-up.

The first stage in accessing your washer is to get rid of the screws about the door body. There are washer repair orange county located on the doorway hinge and two right opposite. These 4 screws will require to be taken out to acquire accessibility into the within of the washer.

With the entrance off the washer, the drain pump, motor manage board and several other components will be seen and available. The motor handle on the appropriate is identified for going out, if your washer stopped spinning, offers an LR error code, this motor manage is the very likely culprit. Cleansing the pump can be carried out from the entrance or the again, the again panel is held restricted with four screws. The only trick to getting the again panel again on is to snap the plastic on to the steel before the panel is put in.

If you are 1 of the unfortunate types working with the wax motor management board malfunction, you are not by yourself, the prime of the washer will need to have to be lifted in order to achieve access.

To do so the four screws underneath the cleaning soap dispenser will need to be taken off, these are the screws the arrows are pointing to in the image on prime of the washer.

In get for the prime elevate free the two corner brackets will need to be removed, if you have already taken off the screws about the door body and the front is off you will see the two brackets that keep the best down, one five/sixteen screw retains each and every bracket.

With the four screws removed from the soap cup housing and the two metallic clips, the prime will elevate up.